|  | | |  | |  | |  | |  | |  | | This mold needs repair before using |
|
| | | |  | | | | | | How would you like this finish in your bathtub? |
|
| | | |  | | | | | | This finish will be reflected in all your parts off this mold |
|
| | | |  | | | | | | This surface will need refinishing before you start waxing it |
|
| | | |  | | | | | | These marked pinholes will need repair before you start waxing your new mold |
|
| | | |  | | | | | | crazing in gelcoat on new mold |
|
| | | |  | | | | | | This mold has not yet been used |
|
| | | |  | | | | | | The gelcoat has either worn thin on this new mold or never been applied thick enough |
|
| | | |  | | | | | | This mold needs repair before waxing |
|
| | | |  | | | | | | make sure the hats are the right ones |
|
| | | |  | | | | | | Make sure you have overflow to fit the mold. This is not standard |
|
| | | |  | | | | | | This is obviously unacceptable poor workmanship |
|
| | | |  | | | | | | This defective surface will be reflected in all the parts made on this mold |
|
| | | |  | | | | | | This rippled surface is how the parts will look when they are taken off the mold |
|
| | | |  | | | | | | This is not standard placement for overflow |
|
| | | |  | | | | | | This repair has not been finished off |
|
| | | |  | | | | | | The floating bowl should sit flat on the mold, this will produce an uneven rim |
|
| | | |  | | | | | | Another warped floating bowl |
|
| | | |  | | | | | | Not only has this mold got a rippled surface but it has been fitted with wooden doors |
|
| | | |  | | | | | | Can you imagine paying for a brand new mold & receiving this |
|
| | | |  | | | | | | this backsplash door is too short for the mold & sits above the mold with a gap underneath |
|
| | | |  | | | | | | this hat is the wrong one for the bowl & could lead to failure of your product & your reputation if used |
|
| | | |  | | | | | | this blender is a vital piece of your equipment, make sure you have the correct drum |
|
|
| |
|
